Magnetic Motion-Sensor Ceiling Light — 3-Color, Stepless Dim, USB-C Rechargeable, Remote & Timers (7.1″)

Snap bright, cord-free light anywhere you need it—closets, stairways, garages, rentals, you name it. This ultra-slim, flush-mount LED light drops onto a magnetic plate (included) and runs on a built-in 5000 mAh battery, so there’s no wiring to fuss with. Use the remote to pick a color temperature (Warm 3000 K, Natural 4000 K, or Cool 6000 K) and dial brightness from a gentle night glow to full output.

A PIR motion sensor watches with a 120° field and triggers from 9.8–16.4 ft, with three handy modes: Constant-On , Night Sensing (only after dark), and Daytime Sensing (anytime). Set a shut-off timer and forget it—great for closets and hallways where lights are too easy to leave on. One full USB-C charge delivers up to 600 minutes of continuous light (or roughly 2,000 motion activations), and the low-profile 7.09″ square face throws a clean, even beam across about 108 sq ft .

Why you’ll love it

• Zero-wire install: Magnetic plate mounts with screws or adhesive; the light snaps on/off for charging.
• Your perfect white: Toggle 3000 K / 4000 K / 6000 K to match task, mood, or time of day.
• Stepless dimming: Fine-tune brightness (10–100%) or tap quick presets (10%/50%/100%).
• Smart sensing: 120° PIR with 3 modes keeps hands free and saves battery.
• Set-and-forget timers: Auto off at 2/15/30/60/120 minutes.
• Slim & tidy: Just 0.59″ thick—looks built-in without hiring an electrician.

At a glance

• Type: Magnetic, wireless flush-mount motion-sensor ceiling light
• Power / Brightness: 3 W, ~210 lm (60 LED beads)
• Color temps: 3000 K (Warm), 4000 K (Natural), 6000 K (Cool)
• Dimming: Stepless 10–100% + 10%/50%/100% presets (remote)
• Modes: Constant On / Night Sensing / Daytime Sensing
• Sensor: PIR, 120°; range 3–5 m (9.84–16.4 ft); ~30 s delay off
• Battery: 5000 mAh rechargeable polymer; up to 600 min continuous or ~2,000 triggers per charge
• Charging: USB-C, 5 V⎓1 A; 6–8 h to full
• Coverage: ~10 m² / 107.64 sq ft
• Control: Remote + onboard button; 5 timers (2/15/30/60/120 min)
• Materials/Color: ABS + acrylic, white
• Size/Weight: 7.09″ × 7.09″ × 0.59″; 0.62 lb

What’s in the box

• 1 × Motion Sensor Ceiling Light
• 1 × Iron mounting plate (pre-attached)
• 1 × Remote control (CR2025 battery installed)
• 1 × USB-C charging cable
• 2 × Screws + 2 × plastic anchors
• 1 × Adhesive pad
• 1 × User manual

Helpful tips

• Slide the switch on the light to AUTO/ON before using the remote.
• Give it a full 6–8 h charge before first use (indicator: red = charging, green = full).
• Clean/dry the surface before applying adhesive; press the plate firmly along the edges.
• For longer battery life, use Night Sensing mode and dim to the lowest comfortable level.
• Rated for everyday indoor use; avoid heavy moisture and direct water exposure.